What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 00:38
Here is a simplified AC power diagram.
First Sentence:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
F1 in Spain: Now that was a lapse in judgment - Ars Technica
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
A circuit breaker is similar, but is resettable.
There are three different concepts here that are getting confused.
Crypto Bros Celebrate Themselves at Bitcoin’s Most MAGA Convention Yet - Rolling Stone
a photo is worth a thousand words.
For this case there are devices called Metal oxide varistors (MOV).
One is “what exactly is in a ‘surge protector’ ? ”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
nine
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
He then describes Rainy Season and Lightning.
But it can get overloaded, and no longer works.
The other is “what does a “fuse” do?”
What does the Turkish word çıplak mean?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Upvotes:
eight
Giant Inland Boulder a Remnant of Ancient Tsunami - Newser
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What does a fuse do?
Doritos, Cheetos, M&Ms and other popular snacks will soon have warning labels in Texas - KHOU
what exactly is a ‘surge’ protector?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–10[John johnson John Johnson ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
He then describes the function of a fuse.
Pregnant women warned against using weight-loss jabs - BBC
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The MOV will conduct when the voltage exceeds 50% of line voltage.
One
The bolt then partially travels down the line to your home.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Why do a lot of autistic people not know how to style their hair?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
[image of Common-mode choke]
Barnstars:
There are two important concepts here.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
These are simplified answers to the original question, and does not change anything I wrote above.
He then asserts :
I post the exact comment here.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Edit 2024–10.
Now when you have a certain ac resistance, then a current flows in a loop.
Because the load is inductive, the current lags the voltage.(by a bit).
It seems Mohan does not understand the difference between a comment and an Answer.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
the problem then depends on "how fast does the fuse operate?".
A fuse is a non-resetable over current circuit protector.
It also is a device that limits the change in current flow.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This one hit behind the barn.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
An AC voltage/ current source, and an ac inductive load.
So, the voltage could go up to 500 volts, and the fuse will not open up.
At least they know the answer if they wanted it.
so, what happens?
What is lightning?
In schematic diagrams this is the symbol for a fuse:
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
At one ohm, the resistor has a maximum of 1 watt power.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
but I think this circuit , shows a few more pieces.
2024–10–16 [ OO OLAOYE OYEBODE ]
This is 'the assistant's answer'
The third is lightning and “how it gets conducted into a home.”
This is where the MOV conducts again, and dissipated the energy.
[old diagram got deleted by accident]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
(Dc diagram shown, AC is similar).
This device then solves the entire problem.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
but this device (an Inductor) … impedes the rapid changes in the current.